Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Tegam 135A: (1 year) CAL VER /5500
DATE:                  11-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.4 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       20
NUMBER OF LINES:       101
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: None
  1.004  DISP         Temperature: 0 - 50degC
  1.004  DISP         Humidity: <80%
  1.005  HEAD         INITIAL SETUP
  1.006  DISP         [32]                     WARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  DISP         Turn on the UUT.
  1.007  DISP         *NOTICE* Replace battery if "BAT" is illuminated
  1.008  PIC          135v
  1.009  HEAD         {DC VOLTAGE}
  1.010  HEAD         DC VOLTAGE: {2V Range}
  1.011  5500   2     1.9000V        0.05% 0.0001U                         2W
  2.001  HEAD         DC VOLTAGE: {20V Range}
  2.002  5500   20    19.000V        0.05% 0.001U                          2W
  3.001  HEAD         DC VOLTAGE: {200V Range}
  3.002  5500   200   190.00V        0.1% 0.01U                            2W
  4.001  HEAD         DC VOLTAGE: {2000V Range}
  4.002  5500   2000  1000.0V        0.1% 0.1U                             2W
  5.001  HEAD         {AC VOLTAGE}
  5.002  HEAD         AC VOLTAGE: {2V Range}
  5.003  5500   2     1.0000V        1% 0.0015U    60H            SI       2W
  6.001  5500   2     1.0000V        1% 0.0015U    10kH           SI       2W
  7.001  5500   2     1.0000V        5% 0.0015U    20kH           SI       2W
  8.001  HEAD         AC VOLTAGE: {20V Range}
  8.002  5500   20    10.000V        1% 0.015U     500H           SI       2W
  9.001  HEAD         AC VOLTAGE: {200V Range}
  9.002  5500   200   100.00V        1% 0.15U      60H            SI       2W
 10.001  HEAD         AC VOLTAGE: {2000V Range}
 10.002  5500   2000  700.0V         1% 1.5U       60H            SI       2W
 11.001  HEAD         {RESISTANCE}
 11.002  HEAD         RESISTANCE: {20 MOhm Range}
 11.003  5500   20    19.000MZ       1% 0.01/                              2W
 12.001  HEAD         RESISTANCE: {2000 kOhm Range}
 12.002  5500   2000  1900.0kZ       0.2% 0.01/                            2W
 13.001  HEAD         RESISTANCE: {200 kOhm Range}
 13.002  5500   200   190.00kZ       0.2% 0.01/                            2W
 14.001  HEAD         RESISTANCE: {20 kOhm Range}
 14.002  DISP         Connect the 5500A to the UUT as follows:
 14.002  DISP         [32] 5500A AUX HI to UUT V/OHM
 14.002  DISP         [32] 5500A AUX LO to UUT COM
 14.002  DISP         [32] 5500A NORMAL HI to UUT V/OHM
 14.002  DISP         [32] 5500A NORMAL LO to UUT COM
 14.002  DISP         Connect the SENSE leads DIRECTLY to the UUT.  Connect
 14.002  DISP         the NORMAL leads to the SENSE leads AT the UUT.
 14.003  5500   20    19.000kZ       0.2% 0.01/                            CW
 15.001  HEAD         RESISTANCE: {2 kOhm Range}
 15.002  5500   2     1.9000kZ       0.25% 0.025/                          CW
 16.001  ASK-   R
 16.002  HEAD         {DC LOW CURRENT}
 16.003  DISP         Set the Function Switch to DCA.
 16.004  DISP         Set the Range Switch to mA-A.
 16.005  PIC          135lc
 16.006  HEAD         DC LOW CURRENT: {50mA Range}
 16.007  5500   50    50.00mA        0.25% 0.02U                           2W
 17.001  HEAD         {AC LOW CURRENT}
 17.002  DISP         Set the Function Switch to ACA.
 17.003  HEAD         AC LOW CURRENT: {50mA Range}
 17.004  5500   50    50.00mA        1.5% 0.05U    60H            SI       2W
 18.001  HEAD         {AC HIGH CURRENT}
 18.002  PIC          135hc
 18.003  HEAD         AC HIGH CURRENT: {10A Range}
 18.004  5500   10    10.00A         1.5% 0.05U    60H            SI       2W
 19.001  HEAD         {DC HIGH CURRENT}
 19.002  DISP         Set the Function Switch to DCA.
 19.003  HEAD         DC HIGH CURRENT: {10A Range}
 19.004  5500   10    10.00A         1% 0.02U                              2W
 20.001  END